Assembly Instructions for the CityWave E-bike

<h1 dir="ltr" id="isPasted"><img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2024121100-0dc9f0d4-2c58-43c8-a8ea-6f124e29b2fe-citywave-mineral-white-02-ezgif.com-webp-to-jpg-converter.jpg" style="width: 450px;" class="fr-fic fr-dib"></h1> <h1 dir="ltr" id="pre-assembly-tips">Pre-Assembly Tips</h1>Welcome to the assembly manual for the Ridewave CityWave eBike. This guide will take you step-by-step through the process of assembling your new bike. Please read through the instructions carefully before starting to ensure a smooth assembly process. Bike will arrive 80% assembled (electronics are pre-assembled).&#xA0;Preparing your eBike is an exciting process! Here are some tips to ensure everything goes smoothly:1. Keep a clean, open workspace for the assembly process.2. Avoid using sharp tools near cables or wires to prevent accidental damage.3. If you&#x2019;re not confident assembling the bike, consider visiting a local bike shop for professional assistance. <h1 dir="ltr" id="contents-of-the-box">Contents of the box</h1>The box includes the following items: <ul><li dir="ltr" style="text-decoration:none;">Ridewave CityWave eBike</li><li dir="ltr" style="text-decoration:none;">User Manual</li><li dir="ltr" style="text-decoration:none;">Battery charger</li><li dir="ltr" style="text-decoration:none;">Maintenance grease</li><li dir="ltr" style="text-decoration:none;">Battery keys</li><li dir="ltr" style="text-decoration:none;">Pedals&#xA0;</li><li dir="ltr" style="text-decoration:none;">Toolkit bag containing:<ul><li dir="ltr" style="text-decoration:none;">8/10mm Wrench</li><li dir="ltr" style="text-decoration:none;">13/15mm Wrench</li><li dir="ltr" style="text-decoration:none;">13/16mm Wrench</li><li dir="ltr" style="text-decoration:none;">2.5mm Hex Key</li><li dir="ltr" style="text-decoration:none;">3mm Hex Key</li><li dir="ltr" style="text-decoration:none;">4mm Hex Key</li><li dir="ltr" style="text-decoration:none;">5mm Hex Key</li><li dir="ltr" style="text-decoration:none;">6mm Hex Key</li><li dir="ltr" style="text-decoration:none;">7mm Hex Key</li></ul></li></ul> <h1 dir="ltr" id="step-1-unpack-the-bike">Step 1: Unpack the Bike&#xA0;</h1><ul><li dir="ltr" style="text-decoration:none;">Opening the box:&#xA0;Carefully open the box using scissors or a Stanley knife. Avoid cutting too deeply to prevent damaging the bike or accessories. Remove the accessories box, which contains essential tools and components.</li><li dir="ltr" style="text-decoration:none;">Getting bike ready for unfolding: After removing the accessories box, lift the bike out with assistance or cut the sides of the box to make it easier to access. Remove all protective materials (foam, cardboard, zip ties, and tape). Pay extra attention to avoid cutting wires while removing zip ties. Carefully remove the front wheel (1), making sure to avoid contact with the left crank. Stand the CityWave upright on the rear wheel (2) and the mounting stand (3).&#xA0;</li></ul><img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2024121101-435e7508-4ef9-4d89-bb2d-4a6b69cd1055-3d3619bc-b823-45f0-84da-367b6b1da4aa.png" style="width: 667px;" class="fr-fic fr-dib fr-fil"><img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2024121101-9a8f2cff-48f0-48d4-ae82-6fbede9f2a8a-d0f309b5-893f-4d9c-a824-1c60f8d4caf1.png" style="width: 300px;" class="fr-fic fr-fil fr-dib"> <h1 dir="ltr" id="step-2-attach-handlebars-to-frame">Step 2: Attach Handlebars to Frame</h1><ul><li dir="ltr" style="text-decoration:none;">Orienting head stem and forks:&#xA0;When packed in the factory, the forks will be facing backwards to compact the bike for packing. Lift the front of the bike and twist the head stem so that it faces towards the front of the bike. The brake caliper where the rotor will sit should be behind the forks on the left side of the bike.&#xA0;</li><li dir="ltr" style="text-decoration:none;">Attaching handlebars: Once the forks are aligned properly, use the 4mm hex key contained in the toolkit to loosen the 4 handlebar fixing bolts (1) on the handlebar clasp (2). Centre the handlebars (3) in position paying attention to the horizontal guidelines, these should not be visible on either side of the clasp once the handlebars are fixed in place. Tighten the handlebars in place with the 4 screws to 6Nm of torque.</li></ul><img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2024121100-8a32f7ac-253a-4831-9836-e7518294db76-c8319972-fbdf-43b1-a218-960f974a4d0a.png" style="width: 1000px;" class="fr-fic fr-dib fr-fil"> <h1 dir="ltr" id="step-3-assembling-the-front-wheel">Step 3: Assembling the front wheel</h1><ul><li dir="ltr" style="text-decoration:none;">Preparing wheel:&#xA0;Ensure that the wheel is ready to be fixed to the front forks by removing all external cardboard packaging and cable ties. Remove the plastic mounting stand from the forks (1). This step can be made easier if the bike is inverted on it&apos;s handlebars, provided it is laying on it&apos;s cardboard box or some other soft surface to avoid scratching the frame. Remove the plastic spacer (3) from between the brake pads (4) in the front brake caliper (left fork).</li></ul><img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2024121101-c2ae634c-a129-4795-9c97-5d8125f885de-147f7f41-52e9-470c-b3cf-0ac51ac2c6c3.png" style="width: 1000px;" class="fr-fic fr-dib fr-fil"><ul><li dir="ltr" id="isPasted" style="font-size: 16px;">Inserting wheel into fork:&#xA0;Insert the front wheel into the fork dropouts, ensuring that the brake pads are correctly aligned with the rotor. Once the wheel is successfully in the dropouts, assemble the quick-release axle by positioning the spring on both sides. THE SPRINGS (5) MUST BE MOUNTED WITH THEIR NARROW SIDE FACING THE HUB/WHEEL.&#xA0;</li></ul><img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2024121101-10a65ce7-20d0-4c7a-8ae0-42675649749a-f3d299db-934b-48a5-a2a7-288bb163883c.png" style="width: 665px;" class="fr-fic fr-dib fr-fil"><ul><li dir="ltr" id="isPasted" style="font-size: 16px;">Securing wheel safely:&#xA0;Tighten the axle nut and close the quick-release lever. The quick-release lever (7) must point upward and should close with noticeable resistance.&#xA0;WARNING: An improperly closed quick-release lever may open again. This can lead to severe accidents. Closing the quick-release lever must be difficult enough that it requires the use of your palm. Only then is the tension strong enough, approximately 15 kg.</li></ul><img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2024121101-4eeb2f0b-b96e-4c60-8de8-739fb21a2739-857e66ef-d807-4f0a-bb6a-7c97ceb36c3a.png" style="width: 665px;" class="fr-fic fr-dib fr-fil"><ul><li style="font-weight: bold; font-size: 16px;">POSITION A = OPEN, POSITION B = CLOSED</li></ul><h1 dir="ltr" id="step-4-assembling-front-light-and-front-fender">Step 4: Assembling Front Light and Front Fender</h1><ul><li dir="ltr">Front light assembly: Ensure that the arrows (1) on the headlight cable connectors align. WARNING:&#xA0;Misalignment may cause faulty connections, and the e-bike will not function. Disconnect the plug on the headlight cable (2). Reroute the headlight cable above the mount (3). Remove screw (4) using a 4 mm Allen key. Mount the headlight (5) with the fender bracket (6).</li></ul><img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2024121101-5e9dfa1c-04ec-4fb5-ba08-3d95213746d1-b00eef84-5ee9-43df-a53e-94926eb02f06.png" style="width: 1000px;" class="fr-fic fr-dib fr-fil"><img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2024121101-7337f1d8-3ddf-42bf-a0b1-722a87752f5d-e3bf4f03-5486-49cc-8b68-0e413361c8c6.png" style="width: 320px;" class="fr-fic fr-dib fr-fil"><ul><li dir="ltr" style="font-size: 16px;">Front fender assembly:&#xA0;Mount the headlight bracket (6) together with the fender holder (7), washer (8), and screw (9) using the 4 mm Allen key. Align the fender (1) with the struts (2). Secure screws (3) and washers (4) on both sides. Check the functionality of the front light by holding the plus button once the cables are connected and the bike is on.</li></ul><img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2024121101-27f14f08-354c-4f2b-b512-d866671f9838-77133eff-f148-4652-a846-8cce4cd80029.png" style="width: 1000px;" class="fr-fic fr-dib fr-fil"> <h1 id="isPasted">Step 5: Pedal assembly</h1><ul><li style="font-size: 16px;">Turning pedals:&#xA0;Grease the pedal threads (1). Screw in the left pedal (L) counterclockwise into the left crank. Screw in the right pedal (R) clockwise into the right crank. Tighten both pedals to 30 Nm using the 15 mm open-end wrench from the toolkit.</li></ul><h1 id><img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2024121101-0ced9b2a-3986-4df1-af3b-d92ed648781b-fac1c529-d449-4372-ba10-0f12654c4afb.png" style="width: 1000px;" class="fr-fic fr-dib fr-fil"></h1>Note:&#xA0;The frame number (1) is located under the frame tube. <h1 id="step-6-pumping-the-tyres">Step 6: Pumping the Tyres <img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2024121101-2e69ebec-ca80-47aa-b42f-01bac9339b20-f1d07b0e-1aa6-4f7b-8e22-913c0837635a.png" class="fr-fic fr-dii" style="width: 400px;"></h1><img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2024112905-07d6389c-a31b-4d5d-b8b5-13ab7a904447-valve%20attached.jpg" style="width: 400px;" class="fr-fic fr-dii"><img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2024112905-f492dc93-5a07-494f-9e03-d8133669a050-a12fd1de-1469-4063-a2df-122215f56fdc.png" style="width: 400px;" class="fr-fic fr-dii"><ul><li style="font-size: 16px;">When preparing to pump the tyres:<ul style="font-size: initial;"><li style="font-size: 16px;">Locate the valve adapter from within your CityWave box. The first picture in this step shows the valve adapter in my hands.</li><li>Screw on the adapter to the valve as seen in the picture that follows. This now allows the tyres to be pumped by a standard australian nozzle.</li><li>Use a tyre pump to inflate the tyres to the recommended PSI listed on the side of the tyres. For the CityWave, this is an inflation pressure of 35-70 PSI.<ul><li style="font-size: 16px;">Inflating tyres:&#xA0;Pump both the front and rear tyres to the pressure specified on the tyre sidewall. For the CityWave the recommended PSI is above.</li><li style="font-size: 16px;">For a Softer Ride: A PSI range of 35-45 for a softer, more comfortable ride. This pressure is ideal for riders who frequently encounter uneven or off-road terrain.</li><li style="font-size: 16px;">For a Firmer Ride: RECOMMENDED: If you prefer a sturdier and more responsive feel, aim for a PSI range of 45-70. Higher pressure reduces the frequency of pumping and is better suited for consistently flat terrain, such as urban roads.&#xA0;</li><li style="font-size: 16px;">Finding Your Ideal PSI: Experiment with different pressure levels in the front and rear tires until you discover what feels best for your riding style and terrain. Adjust as needed to achieve your desired balance of comfort and performance.</li></ul></li></ul></li></ul><h2 id="important">Important:</h2><ul><li style="font-size: 16px;">While inflating, pause occasionally to check that the tyre bead (indicated with arrows) is properly seated around the rim.</li><li style="font-size: 16px;">Ensure that the pumping nozzle is correctly attached to the inner tube valve, air should escape before the lever is adjusted. (Proper attachment circled in red)</li><li style="font-size: 16px;">If the bead starts to rise unevenly, deflate the tyre slightly and press the bead back into place before continuing.</li><li style="font-size: 16px;">Ensure the tyre bead line (a thin moulded line near the sidewall) is evenly positioned just above the rim on both sides.</li><li style="font-size: 16px;">If any part of the inner tube becomes exposed during inflation, stop immediately as this can cause the tube to burst.</li></ul>Properly seating the bead ensures safe and consistent tyre inflation. <h1 dir="ltr" id="final-checks">Final Checks</h1>Before riding your Ridewave CityWave eBike, perform the following checks:- Ensure all bolts are tightly fastened.- Check the tire pressure and inflate as needed.Congratulations! Your Ridewave CityWave eBike is now fully assembled. Enjoy your ride and don&#x2019;t hesitate to contact our support team for any additional assistance.

CityWave Assembly Manual

Display Operation Instructions for the CityWave E-bike

Home interface description (L200SFZ22):<img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2024121608-7c41b791-d397-4c50-9fe4-064b794b6c84-8dec4d19-b347-4e90-ae1e-33d058096616.png" style="width: 600px;" class="fr-fic fr-dib"><ul><li>The display provides a comprehensive overview of your eBike&apos;s status and performance. At the top, the Speed Ring shows your current speed and the speed limit grid, configurable in KM/H or MPH.&#xA0;</li><li>To the left, indicators include the Headlight status, Bluetooth connection, Push Assist Mode, and Cruise Control Sign. Below these, the Gear Area displays the assist level, ranging from 0 (no assist) to 5 (maximum assist).&#xA0;</li><li>The Battery Percentage is clearly represented in bars, showing charge levels from 0% to 100%. In the center, the large numeric display indicates speed, while the Multi-Function Area at the bottom allows you to toggle between trip data such as TRIP (trip distance), ODO (odometer), AVG (average speed), MAX (maximum speed), TIME (ride duration), KCAL (calories burned), and POW (power output) by clicking the &#x201C;&#x25CF;&#x201D; button.&#xA0;</li><li>Lastly, the&#xA0;Speed &amp; Error Code Display alerts you to any issues: normal operation displays speed, while errors trigger flashing error codes for troubleshooting.&#xA0; </li></ul> Operating the display: <img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2024121608-8c6f9958-db88-43bd-8f99-598fdfbda031-108a269b-b7a3-4eac-bd98-9435730ad15e.png" style="width: 600px;" class="fr-fic fr-dib"><div data-message-author-role="assistant" data-message-id="ef3f9af3-7789-4706-8dfa-2e597d76f89f" data-message-model-slug="gpt-4o" dir="auto">The display controls are simple and intuitive:<ul><li style="font-size: 14px;">&quot;+&quot; Key:<ul style="font-size: initial;"><li style="font-size: 14px;">Short press: Increase assist level / Move cursor up</li><li style="font-size: 14px;">Long press: Turn on/off the eBike light</li><li style="font-size: 14px;">Long press and hold: No function</li></ul></li><li style="font-size: 14px;">&quot;-&quot; Key:<ul style="font-size: initial;"><li style="font-size: 14px;">Short press: Decrease assist level / Move cursor down</li><li style="font-size: 14px;">Long press and hold: Activate 6km/h push assist</li></ul></li><li style="font-size: 14px;">&quot;&#x25CF;&quot; (Power) Key:<ul style="font-size: initial;"><li style="font-size: 14px;">Short press: Switch data display / Confirm menu selection</li><li style="font-size: 14px;">Long press: Power On/Off</li></ul></li></ul>Quick Tip:<ul><li style="font-size: 14px;">Press and hold &quot;+&quot; and &quot;-&quot; to enter/exit the menu.</li><li style="font-size: 14px;">Press and hold&#xA0;&quot;+&quot; and &quot;&#x25CF;&quot; to reset Trip information.</li></ul> <img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2024121608-5cca8b5f-e1f1-4825-9f60-bb70dd378f60-95c8397d-e58d-4140-8c85-ae1a2d128e6c.png" style="width: 600px;" class="fr-fic fr-dib"><ul><li>When selecting the &quot;Size&quot; item, press the &quot;<img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2024121608-0735a473-1484-4836-bdf8-0c487874c608-d7c0b4f5-9457-48e3-ad8a-acbbc3607beb.png" style="width: 25px;" class="fr-fic fr-dii">&quot; key to enter this item, and then press the &quot;+&quot; and &quot;-&quot; keys to select the wheel diameter, ranging from 04 to 99. In particular, 27.5 inches displays &quot;27.5&quot;; then press the &quot;<img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2024121608-4356868e-4371-496d-8c69-a19e7547d691-580fb7bb-b4c2-4345-aacb-4f2737ca626a.png" id="isPasted" class="fr-fic fr-dii" style="width: 25px;">&quot; key to confirm. and exit the item.</li></ul> The L200SFZ22 display is designed to provide an intuitive and user-friendly interface, offering complete control over your eBike&apos;s performance and settings. By familiarising yourself with the key functions and indicators, you can easily monitor your ride, adjust settings, and troubleshoot issues as needed. Whether you&apos;re managing assist levels, tracking ride data, or customising the display settings, this manual ensures you have all the information to make the most of your eBike experience. Enjoy your ride and explore with confidence!&#xA0;</div>

CityWave Display Operation Manual

Instructions to unlock speed for the CityWave E-bike

<img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2024121803-cc5ef4be-860a-4180-b8e1-410d16a6efbb-87%20%25.png" style="width: 428px;" class="fr-fic fr-dib" data-first-enter-image="true">By proceeding with any modifications, you accept full responsibility and agree to the following terms:<ol><li style="text-align: center; font-size: 16px; font-family: Arial, Helvetica, sans-serif;">Legal Liability: You are solely accountable for any legal consequences, including fines, penalties, or sanctions, resulting from the use of an unlocked or modified eBike on public roads.<ul style="font-family: initial;"><li id="isPasted" style="font-size: 14px; font-family: Arial, Helvetica, sans-serif;">Under the Australian Road Rules and relevant state laws, an eBike that exceeds 250W of continuous power output, a 25km/h pedal-assisted speed limit, or a 6km/h throttle speed limit, does not meet the legal classification of a bicycle. As such, it may be subject to motor vehicle regulations, which include registration, licensing, and insurance requirements.</li></ul></li><li style="font-size: 16px; font-family: Arial, Helvetica, sans-serif;">Accidents &amp; Injuries: Any injuries, damages, or accidents caused by operating a modified eBike are entirely at your own risk. Ridewave Bikes does not accept any liability for such occurrences.</li><li style="font-size: 16px; font-family: Arial, Helvetica, sans-serif;">Warranty Implications: Unauthorized alterations to your eBike&apos;s advanced settings may result in the voiding of certain warranty provisions, including coverage for repairs, maintenance, or replacements.</li></ol>Ridewave Bikes takes no legal, financial, or personal responsibility for the misuse of these settings. By unlocking or modifying your eBike, you acknowledge that you are acting at your own discretion and agree to comply with all applicable local laws.Ride Responsibly. Ride Safely. 1. Legal Compliance and Riding Guidelines:<ul><li style="font-family: Arial, Helvetica, sans-serif; color: rgb(0, 0, 0); line-height: 2;">Speed:&#xA0;The legal speed limit for public road use is 25 km/h across all Australian states. Unlocking speed limits is strictly for private property or off-road use only.</li></ul>Important Notes:<ul><li style="font-family: Arial, Helvetica, sans-serif; color: rgb(0, 0, 0); font-size: 16px;">Ridewave Bikes, including the CityWave are designed to comply with Australian road laws. Always ensure you operate your bike within the limits of your local regulations.</li><li style="font-family: Arial, Helvetica, sans-serif; color: rgb(0, 0, 0); font-size: 16px;">Any modifications to power output, speed settings, or throttle functionality are for private use only. Such changes may make the bike non-compliant with road laws.</li><li style="font-family: Arial, Helvetica, sans-serif; color: rgb(0, 0, 0); font-size: 16px;">Unauthorized modifications can void the warranty and may lead to legal penalties.</li></ul>Stay safe, ride responsibly, and enjoy the performance of your CityWave within the guidelines of Australian regulations. 2. Accessing the Advanced Settings &#xA0; &#xA0; &#xA0; &#xA0; &#xA0;&#xA0;<img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2025011100-c7ba272c-8fed-44fc-8603-dcde40e73b7d-7a37c5a9-fe09-4798-80f7-be178a3f0c57.png" id="isPasted" class="fr-fic fr-dii" style="width: 400px;"> <ol data-pm-slice="3 3 []" data-spread="true" id="isPasted" start="1"><li style="font-family: Arial, Helvetica, sans-serif; color: rgb(0, 0, 0);">Turn off the Display Begin with the display turned off. Ensure your bike is stationary and in a safe environment to make adjustments. <img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2025011100-44bbf19c-24b0-4ae1-bd19-9f2a054c919d-img_4843.jpg" style="width: 400px;" class="fr-fic fr-dib fr-fil"></li><li style="font-family: Arial, Helvetica, sans-serif; color: rgb(0, 0, 0);">Access the Passcode Prompt Hold the power button for 5 seconds. After this, you&#x2019;ll see a prompt to enter a passcode.</li><li style="font-family: Arial, Helvetica, sans-serif; color: rgb(0, 0, 0);">Enter the Passcode Use the + and - buttons to adjust each digit and the power button to move to the next digit. The passcode for the MiniWave is&#xA0;0526. <img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2025011100-1227c750-0de2-4ae6-8df4-896bd8309af8-img_6119.jpg" style="width: 400px;" class="fr-fic fr-dib fr-fil"></li><li style="font-family: Arial, Helvetica, sans-serif; color: rgb(0, 0, 0);">Navigate to the Speed Settings Once in the settings menu, use the power button to cycle through the menu pages until you reach the speed page. The default value will be displayed as&#xA0;Y (speed limit enabled). <img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2025011100-6a4e76bf-dda6-40fc-b820-a30be2899ae2-img_6121.jpg" style="width: 400px;" class="fr-fic fr-dib fr-fil"></li><li style="font-family: Arial, Helvetica, sans-serif; color: rgb(0, 0, 0);">Change the Speed Limit Setting Use the + or - buttons to change the value from Y to N (speed limit disabled).</li><li style="font-family: Arial, Helvetica, sans-serif; color: rgb(0, 0, 0);">Save Your Changes Hold both the + and&#xA0;- buttons simultaneously to save your changes. You will automatically be returned to the home page. </li></ol>NOTE: Unlocking the speed limit will increase the maximum speed from 25 km/h to 29 km/h. This adjustment is up to the discretion of the customer, and the motor power cannot be unlocked further beyond 250W on the CityWave. &#xA0;&#xA0;

CityWave

CityWave Assembly Manual

CityWave Display Operation Manual

How to unlock Speed - CityWave