Glide Series
Glide-X Assembly Manual
Assembly Instructions for the Glide-X E-bike
Glide-B Assembly Manual
Assembly Instructions for the Glide-B E-bike
Glide Display Operation Manual
Ridewave's Glide-X & Glide-B are equipped with our intelligent OLED display (SW102).
Troubleshooting: eBike Display Not Turning On
If your Glide Series eBike display does not power on, it may be because the battery has entered Sleep Mode. This is a built-in self-protection feature designed to prevent deep discharge and extend the battery’s lifespan. Sleep Mode can automatically
Glide — Motor Controller Removal
Over time, your Glide eBike’s motor controller may need inspection, servicing, or replacement. This guide explains how to safely remove the controller from the frame to access wiring connections or install a new unit. To remove the controller, you fi
Glide — Rear Tail Light Removal
This guide explains how to remove the rear wheel and rear tail light from the bike. Using an 18 mm wrench, loosen and remove the rear axle nuts. Please take care not to lose any exterior washers or internal locking washers. Set these aside safely for