Assembly Instructions for the UrbanWave E-bike

<h1 dir="ltr" id="isPasted"><img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2024121108-6d841545-d440-4703-9c1d-6ba2ee019daa-urbanwave-platinum-02-ezgif.com-webp-to-jpg-converter.jpg" style="width: 450px;" class="fr-fic fr-dib fr-fil"></h1> <h3 data-pm-slice="1 1 []" id="isPasted">Pre-Assembly Tips</h3>Welcome to the assembly manual for the Ridewave Urban eBike. This guide will take you step-by-step through the process of assembling your new bike. Please read through the instructions carefully before starting to ensure a smooth assembly process. The bike will arrive 80% assembled (electronics are pre-assembled). Preparing your eBike is an exciting process! Here are some tips to ensure everything goes smoothly:<ol data-spread="false" start="1"><li>Keep a clean, open workspace for the assembly process.</li><li>Avoid using sharp tools near cables or wires to prevent accidental damage.</li><li>If you&#x2019;re not confident assembling the bike, consider visiting a local bike shop for professional assistance.</li></ol> <h3 id="contents-of-the-box">Contents of the Box</h3>The box includes the following items:<ul data-spread="false"><li>Ridewave Urban eBike</li><li>User Manual</li><li>Battery charger</li><li>Maintenance grease</li><li>Battery keys</li><li>Pedals</li><li>Toolkit bag containing:<ul data-spread="false"><li>8/10mm Wrench</li><li>13/15mm Wrench</li><li>13/16mm Wrench</li><li>2.5mm Hex Key</li><li>3mm Hex Key</li><li>4mm Hex Key</li><li>5mm Hex Key</li><li>6mm Hex Key</li><li>7mm Hex Key</li></ul></li></ul> <h3 id="step-1-unpack-the-bike">Step 1: Unpack the Bike</h3>Opening the box: Carefully open the box using scissors or a Stanley knife. Avoid cutting too deeply to prevent damaging the bike or accessories. Remove the accessories box, which contains essential tools and components.Getting the bike ready for assembly: After removing the accessories box, lift the bike out with assistance or cut the sides of the box to make it easier to access. Remove all protective materials (foam, cardboard, zip ties, and tape). Pay extra attention to avoid cutting wires while removing zip ties. Carefully remove the front wheel, ensuring no contact with the left crank. Stand the Urban upright on the rear wheel and use a mounting stand or appropriate support to keep it stable. <h3 id="step-2-assemble-the-handlebars">Step 2: Assemble the Handlebars</h3><ol data-spread="false" start="1"><li>Rotate the stem forward: Loosen the stem bolts using a 5mm hex key and rotate the stem so it is aligned with the front of the bike.</li><li>Remove the faceplate: Use a 4mm hex key to loosen and remove the four bolts on the stem faceplate.</li><li>Position the handlebars: Align the handlebars with the stem, ensuring the horizontal guidelines on the handlebars are evenly positioned within the faceplate.</li><li>Tighten the bolts: Reattach the faceplate and tighten the bolts in an X-pattern to ensure even pressure. Torque the bolts to 6Nm.</li></ol> <h3 id="step-3-assemble-the-front-wheel">Step 3: Assemble the Front Wheel</h3><ol data-spread="false" start="1"><li style="font-size: 16px;">Prepare the wheel: Loosen the thru-axle bolt on one side of the wheel and remove the thru-axle completely.</li><li>Insert the wheel: Align the front wheel into the fork dropouts, ensuring the disc rotor fits properly into the brake caliper.</li><li>Secure the wheel: Thread the thru-axle through the fork and the wheel hub. Tighten the bolt on the thru-axle until the desired tension is achieved. Ensure the wheel is securely mounted and spins freely without contacting the brake pads or fork.</li></ol> <h3 id="step-4-assemble-the-pedals">Step 4: Assemble the Pedals</h3><ol data-spread="false" start="1"><li>Identify left and right pedals: The left pedal is marked with an &#x201C;L&#x201D; and the right pedal is marked with an &#x201C;R.&#x201D;</li><li>Attach the left pedal: Thread the left pedal counterclockwise onto the left crank arm and tighten it using a 15mm wrench.</li><li>Attach the right pedal: Thread the right pedal clockwise onto the right crank arm and tighten it using a 15mm wrench.</li></ol> <h3 id="step-5-pump-the-tyres">Step 5: Pump the Tyres&#xA0;</h3><ol data-spread="false" start="1"><li>Locate the valve adapter: Use the valve adapter provided in your toolkit.</li><li>Inflate the tyres: Attach the adapter to the valve and inflate both front and rear tyres to the recommended PSI listed on the tyre sidewall. For the Urban, the recommended range is 35-70 PSI.<ul data-spread="false"><li>Softer Ride: Inflate to 35-45 PSI for more comfort on uneven terrain.</li><li>Firmer Ride: Inflate to 45-70 PSI for a sturdier feel on flat urban roads.</li></ul></li><li>Check the tyre bead: Ensure the tyre bead is properly seated on the rim. If it rises unevenly, deflate slightly, adjust, and re-inflate.</li></ol> <h3 id="isPasted">Step 6: Attaching the Throttle (Optional):</h3>Note:&#xA0;The throttle is only to be used on private-property or for off-road use. It is ILLEGAL to use throttle-power exceeding 6km/h on public roads in most states in Australia, and this throttle has no way of being limited to this speed. Please refer to our manual <a href="https://support.ridewavebikes.com/en-US/how-to-unlock-speed---urbanwave-1015702">here</a> for more information.<img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2024121802-67c1015b-fb2b-46a9-9a2c-0e6bc8560ea9-img_4506.jpg" style="width: 300px;" class="fr-fic fr-dib fr-fil"><img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2024121802-99b023b1-5eed-4a52-a352-f7df6d5aa028-img_4507.jpg" style="width: 300px;" class="fr-fic fr-dib fr-fil"><img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2024121802-a91bbd40-0233-48e7-b881-310ae518421b-img_4508.jpg" style="width: 300px;" class="fr-fic fr-dib fr-fil"><img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2024121802-72a788fa-fae7-4375-a34f-8864e20025e7-img_4509.jpg" style="width: 300px;" class="fr-fic fr-dib fr-fil"><img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2024121802-3515fb48-e164-405f-854d-86fde5e0c06f-img_4510.jpg" style="width: 300px;" class="fr-fic fr-dib fr-fil"><img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2024121802-68d93b86-7457-4443-8c3b-82f4d1a17381-img_4511.jpg" style="width: 300px;" class="fr-fic fr-dib fr-fil"> <ol><li id="isPasted">Remove plastic stopper: Pull the plastic stopper out that secures the handlebar grip to the bike.</li><li>Remove grip:&#xA0;With the stopper removed, twist and firmly pull the grip away from the display and brake lever to expose the handlebar underneath</li><li>Loosen handlebar attachments:&#xA0;Use a 4mm hex key for the brake lever, and a 2.5mm hex key to loosen the display. Once they are loose enough to be easily shifted, loosen the throttle with a 3mm hex key and slide it towards the brake lever so they make contact.</li><li>Reattach the grip:&#xA0;Slide the grip back onto the handlebars by twisting and pushing simultaneously. Once the grip is contacting the throttle itself, take a look through at the side of the grip where the stopper lives. The grip should be far enough onto the handlebar that the metal and opening in the grip should be even (as demonstrated in the image). If the grip can&apos;t fit all the way onto the bike because of the position of the attachments, loosen and move the brake lever, throttle, and display until the grip opening is flush with the handlebar. Push the stopper back in with your palm and tighten the handlebar attachments using the hex keys.</li><li>Connect the cable:&#xA0;Paying attention to the orientation of the arrow indicators on the orange throttle cable, push the ends together and use the screw mechanism to fasten the cables together. Use a zip tie to fix this loose cable to the other cables in-front of the handlebars to keep it&apos;s position constant. Test the function of the throttle, ensuring that the bike is in one of the pedal assistance modes (eco being the lowest).</li></ol> <h3 id="final-checks">Final Checks</h3>Before riding your Ridewave Urban eBike, perform the following checks:<ul data-spread="false"><li>Ensure all bolts are tightly fastened.</li><li>Check the tyre pressure and inflate as needed.</li><li>Ensure the brakes function correctly and the wheels spin freely.</li></ul>Congratulations! Your Ridewave Urban eBike is now fully assembled. Enjoy your ride and don&#x2019;t hesitate to contact our support team for any additional assistance.

Urban Ebike Assembly Manual

Display Operation Instructions for the UrbanWave E-bike

Urban Ebike Display Operation Manual

Instructions to unlock speed for the UrbanWave E-bike

<img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2024121803-cc5ef4be-860a-4180-b8e1-410d16a6efbb-87%20%25.png" style="width: 428px;" class="fr-fic fr-dib">By proceeding with any modifications, you accept full responsibility and agree to the following terms:<ol><li style="text-align: center; font-size: 16px; font-family: Arial, Helvetica, sans-serif;">Legal Liability: You are solely accountable for any legal consequences, including fines, penalties, or sanctions, resulting from the use of an unlocked or modified eBike on public roads.<ul style="font-family: initial;"><li id="isPasted" style="font-size: 14px; font-family: Arial, Helvetica, sans-serif;">Under the Australian Road Rules and relevant state laws, an eBike that exceeds 250W of continuous power output, a 25km/h pedal-assisted speed limit, or a 6km/h throttle speed limit, does not meet the legal classification of a bicycle. As such, it may be subject to motor vehicle regulations, which include registration, licensing, and insurance requirements.</li></ul></li><li style="font-size: 16px; font-family: Arial, Helvetica, sans-serif;">Accidents &amp; Injuries: Any injuries, damages, or accidents caused by operating a modified eBike are entirely at your own risk. Ridewave Bikes does not accept any liability for such occurrences.</li><li style="font-size: 16px; font-family: Arial, Helvetica, sans-serif;">Warranty Implications: Unauthorized alterations to your eBike&apos;s advanced settings may result in the voiding of certain warranty provisions, including coverage for repairs, maintenance, or replacements.</li></ol>Ridewave Bikes takes no legal, financial, or personal responsibility for the misuse of these settings. By unlocking or modifying your eBike, you acknowledge that you are acting at your own discretion and agree to comply with all applicable local laws.Ride Responsibly. Ride Safely. 1. Legal Compliance and Riding Guidelines:<ul><li style="font-family: Arial, Helvetica, sans-serif; color: rgb(0, 0, 0); line-height: 2;">Speed:&#xA0;The legal speed limit for public road use is 25 km/h across all Australian states. Unlocking speed limits is strictly for private property or off-road use only.</li><li style="font-family: Arial, Helvetica, sans-serif; color: rgb(0, 0, 0); line-height: 2;">Throttle:&#xA0;As the UrbanWave comes with a throttle that cannot be reduced to the legal limitation of 6km/h top speed, installing and utilising the throttle can only be done on private property or for off-road use.&#xA0;</li></ul>Important Notes:<ul><li style="font-family: Arial, Helvetica, sans-serif; color: rgb(0, 0, 0); font-size: 16px;">Ridewave Bikes, including the UrbanWave are designed to comply with Australian road laws. Always ensure you operate your bike within the limits of your local regulations.</li><li style="font-family: Arial, Helvetica, sans-serif; color: rgb(0, 0, 0); font-size: 16px;">Any modifications to power output, speed settings, or throttle functionality are for private use only. Such changes may make the bike non-compliant with road laws.</li><li style="font-family: Arial, Helvetica, sans-serif; color: rgb(0, 0, 0); font-size: 16px;">Unauthorized modifications can void the warranty and may lead to legal penalties.</li></ul>Stay safe, ride responsibly, and enjoy the performance of your UrbanWave within the guidelines of Australian regulations. 2. Accessing the Advanced Settings<img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2024121803-d83cbcca-ab8d-4259-b962-de08a78715e7-1ea85525-e179-432f-9d40-6f2605a5571c.png" style="width: 222px;" class="fr-fic fr-dii"><img src="https://attachments.gorgias.help/1QNmd2YbR4A79XA0/hc/GyBLV6kNwrxNbQkK/2024121803-be0610b4-b371-415c-abc6-ab24c476d933-a7404f7c-8b9d-448e-b5ff-6e19c1840d68.png" style="width: 172px;" class="fr-fic fr-dii"><ol start="1" style="margin-bottom:0cm;margin-top:0cm;" type="1"><li style="margin: 12pt 0cm 0cm; line-height: normal; font-size: 16px; font-family: Arial, Helvetica, sans-serif; color: black; vertical-align: baseline;">Enter the Settings Menu:<ul style="font-size: initial; font-family: initial;"><li style="margin: 12pt 0cm 0cm; line-height: normal; font-size: 16px; font-family: Arial, Helvetica, sans-serif; color: black; vertical-align: baseline;">To open the settings menu, press and hold the MODE button within 10 seconds of turning on the display. Use the UP and DOWN arrows to scroll through the options. Press the MODE&#xA0;button briefly to select an option, or press and hold it to return to the previous menu.Note:&#xA0;The menu will close automatically if there&#x2019;s no activity for 30 seconds or if you start riding. For safety reasons, settings cannot be changed while riding. &#xA0;</li></ul></li><li style="margin: 0cm; line-height: normal; font-size: 16px; font-family: Arial, Helvetica, sans-serif; color: black; vertical-align: baseline;">Unlocking the Advanced Menu:<ul style="font-size: initial; font-family: initial;"><li style="margin: 0cm; line-height: normal; font-size: 16px; font-family: Arial, Helvetica, sans-serif; color: black; vertical-align: baseline;">Navigate to the advanced settings menu, and after using the MODE key the user will be prompted to enter a passcode. Use the passcode &apos;0526&apos; to access the advanced settings. Make any necessary adjustments to the wheel diameter or speed limitation settings &#xA0; &#xA0;</li></ul></li></ol>&#xA0;

Urban

Urban Ebike Assembly Manual

Urban Ebike Display Operation Manual

How to unlock Speed - Urban Ebike