How to unlock Speed - CityWaveUpdated 3 months ago

By proceeding with any modifications, you accept full responsibility and agree to the following terms:

1. Legal Liability: You are solely accountable for any legal consequences, including fines, penalties, or sanctions, resulting from the use of an unlocked or modified eBike on public roads.

   • Under the Australian Road Rules and relevant state laws, an eBike that exceeds 250W of continuous power output, a 25km/h pedal-assisted speed limit, or a 6km/h throttle speed limit, does not meet the legal classification of a bicycle. As such, it may be subject to motor vehicle regulations, which include registration, licensing, and insurance requirements.

2. Accidents & Injuries: Any injuries, damages, or accidents caused by operating a modified eBike are entirely at your own risk. Ridewave Bikes does not accept any liability for such occurrences.

3. Warranty Implications: Unauthorized alterations to your eBike's advanced settings may result in the voiding of certain warranty provisions, including coverage for repairs, maintenance, or replacements.

Ridewave Bikes takes no legal, financial, or personal responsibility for the misuse of these settings. By unlocking or modifying your eBike, you acknowledge that you are acting at your own discretion and agree to comply with all applicable local laws.

Ride Responsibly. Ride Safely.

1. Legal Compliance and Riding Guidelines:

• Speed: The legal speed limit for public road use is 25 km/h across all Australian states. Unlocking speed limits is strictly for private property or off-road use only.

Important Notes:

• Ridewave Bikes, including the CityWave are designed to comply with Australian road laws. Always ensure you operate your bike within the limits of your local regulations.
• Any modifications to power output, speed settings, or throttle functionality are for private use only. Such changes may make the bike non-compliant with road laws.
• Unauthorized modifications can void the warranty and may lead to legal penalties.

Stay safe, ride responsibly, and enjoy the performance of your CityWave within the guidelines of Australian regulations.

2. Accessing the Advanced Settings

1. Turn off the Display
   Begin with the display turned off. Ensure your bike is stationary and in a safe environment to make adjustments.
   
   

2. Access the Passcode Prompt
   Hold the power button for 5 seconds. After this, you’ll see a prompt to enter a passcode.

3. Enter the Passcode
   Use the + and - buttons to adjust each digit and the power button to move to the next digit. The passcode for the MiniWave is 0526.
   
   

4. Navigate to the Speed Settings
   Once in the settings menu, use the power button to cycle through the menu pages until you reach the speed page. The default value will be displayed as Y (speed limit enabled).
   
   

5. Change the Speed Limit Setting
   Use the + or - buttons to change the value from Y to N (speed limit disabled).

6. Save Your Changes
   Hold both the + and - buttons simultaneously to save your changes. You will automatically be returned to the home page.
   
   

NOTE: Unlocking the speed limit will increase the maximum speed from 25 km/h to 29 km/h. This adjustment is up to the discretion of the customer, and the motor power cannot be unlocked further beyond 250W on the CityWave.